bck

.vscode/settings.json

@@ -0,0 +1,3 @@
+{
+    "cSpell.language": "es,es-ES"
+}

ESP32/IBUSM/src/main.cpp

@@ -17,6 +17,9 @@ void loop()
   uint16_t val;
   IBus.loop();
     for (int i=0; i<10; i++) {
+    Serial.print("CH: ");
+    Serial.print(i);
+    Serial.print(": ");
     Serial.print(IBus.readChannel(i));
     Serial.print(" ");
   }

ESP32/OLED_ESP32/.gitignore

@@ -0,0 +1,6 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch
+.vscode

ESP32/OLED_ESP32/.vscode/extensions.json

@@ -0,0 +1,10 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

ESP32/OLED_ESP32/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

ESP32/OLED_ESP32/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

ESP32/OLED_ESP32/platformio.ini

@@ -0,0 +1,19 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:esp32doit-devkit-v1]
+platform = espressif32
+board = esp32doit-devkit-v1
+framework = arduino
+lib_deps = 
+	adafruit/Adafruit GFX Library@^1.10.12
+	adafruit/Adafruit SSD1306@^2.4.6
+	adafruit/Adafruit BusIO@^1.9.3
+	adafruit/Adafruit MCP9808 Library@^2.0.0

ESP32/OLED_ESP32/src/main.cpp

@@ -0,0 +1,60 @@
+#include <Arduino.h>
+
+#include <Wire.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+#include "Adafruit_MCP9808.h"
+
+
+
+#define SCREEN_WIDTH 128 // OLED display width, in pixels
+#define SCREEN_HEIGHT 64 // OLED display height, in pixels
+#define OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
+#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
+Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
+
+// Create the MCP9808 temperature sensor object
+Adafruit_MCP9808 tempsensor = Adafruit_MCP9808();
+
+void setup() 
+{
+  Serial.begin(9600);
+  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
+  display.clearDisplay();
+   if (!tempsensor.begin(0x18)) {
+    Serial.println("Couldn't find MCP9808! Checloop_time your connections and verify the address is correct.");
+  
+  }
+  tempsensor.setResolution(3);
+
+}
+int contador =0;
+unsigned long loop_time = 0;
+void loop() 
+{
+  if ((millis() - loop_time) >= 200){
+  
+  display.clearDisplay();
+  display.setTextSize(1);
+  display.setTextColor(WHITE);
+  display.setCursor(0,0);
+  display.print("Contador: ");
+  display.println(contador++);
+  display.println("");
+  display.setTextSize(1);
+  
+  display.println("SEBAS ROBOTICA");
+  display.println("");
+  display.setTextSize(2);
+  display.print("T: ");
+  //tempsensor.waloop_timee(); 
+  float f = tempsensor.readTempC();
+  //tempsensor.shutdown_waloop_timee(1);
+  display.println(f);  
+  display.display();
+  loop_time = millis();  
+  
+  }
+
+
+}

ESP32/OLED_ESP32/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

ESP32/OLED_ESP32_ARDUINO/OLED_ESP32_ARDUINO.ino

@@ -0,0 +1,40 @@
+
+#include <Wire.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+
+#define SCREEN_WIDTH 128 // OLED display width, in pixels
+#define SCREEN_HEIGHT 32 // OLED display height, in pixels
+
+// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
+// The pins for I2C are defined by the Wire-library. 
+// On an arduino UNO:       A4(SDA), A5(SCL)
+// On an arduino MEGA 2560: 20(SDA), 21(SCL)
+// On an arduino LEONARDO:   2(SDA),  3(SCL), ...
+#define OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
+#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
+Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
+void setup() 
+{
+  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
+  display.clearDisplay();
+
+}
+int contador =0;
+void loop() 
+{
+  
+  display.clearDisplay();
+  display.setTextSize(1);
+  display.setTextColor(WHITE);
+  display.setCursor(0,0);
+  display.print("Contador: ");
+  display.println(contador++);
+  display.setTextSize(1);
+  display.println("UNELECTRONICA");
+  
+  display.display();
+  delay(200);
+
+
+}

ESP32/i2c_scaner_esp32_dev/.gitignore

@@ -0,0 +1,6 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch
+.vscode

ESP32/i2c_scaner_esp32_dev/.travis.yml

@@ -0,0 +1,67 @@
+# Continuous Integration (CI) is the practice, in software
+# engineering, of merging all developer working copies with a shared mainline
+# several times a day < https://docs.platformio.org/page/ci/index.html >
+#
+# Documentation:
+#
+# * Travis CI Embedded Builds with PlatformIO
+#   < https://docs.travis-ci.com/user/integration/platformio/ >
+#
+# * PlatformIO integration with Travis CI
+#   < https://docs.platformio.org/page/ci/travis.html >
+#
+# * User Guide for `platformio ci` command
+#   < https://docs.platformio.org/page/userguide/cmd_ci.html >
+#
+#
+# Please choose one of the following templates (proposed below) and uncomment
+# it (remove "# " before each line) or use own configuration according to the
+# Travis CI documentation (see above).
+#
+
+
+#
+# Template #1: General project. Test it using existing `platformio.ini`.
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# install:
+#     - pip install -U platformio
+#     - platformio update
+#
+# script:
+#     - platformio run
+
+
+#
+# Template #2: The project is intended to be used as a library with examples.
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# env:
+#     - PLATFORMIO_CI_SRC=path/to/test/file.c
+#     - PLATFORMIO_CI_SRC=examples/file.ino
+#     - PLATFORMIO_CI_SRC=path/to/test/directory
+#
+# install:
+#     - pip install -U platformio
+#     - platformio update
+#
+# script:
+#     - platformio ci --lib="." --board=ID_1 --board=ID_2 --board=ID_N

ESP32/i2c_scaner_esp32_dev/include/Colors.h

@@ -0,0 +1,48 @@
+
+#ifndef COLORS_H
+#define COLORS_H
+
+//RESET
+String fontReset = "\e[0m";
+
+//COLORS - REGULAR 
+String Black = "\e[0;30m";
+String Red = "\e[0;31m";
+String Green = "\e[0;32m";
+String Yellow = "\e[0;33m";
+String Blue = "\e[0;34m";
+String Purple = "\e[0;35m";
+String Cyan = "\e[0;36m";
+String White = "\e[0;37m";
+
+//COLORS - BOLD
+String boldBlack = "\e[1;30m";
+String boldRed = "\e[1;31m";
+String boldGreen = "\e[1;32m";
+String boldYellow = "\e[1;33m";
+String boldBlue = "\e[1;34m";
+String boldPurple = "\e[1;35m";
+String boldCyan = "\e[1;36m";
+String boldWhite = "\e[1;37m";
+
+//COLORS - UNDERLINED
+String underlineBlack = "\e[4;30m";
+String underlineRed = "\e[4;31m";
+String underlineGreen = "\e[4;32m";
+String underlineYellow = "\e[4;33m";
+String underlineBlue = "\e[4;34m";
+String underlinePurple = "\e[4;35m";
+String underlineCyan = "\e[4;36m";
+String underlineWhite = "\e[4;37m";
+
+//BACKGROUND - 
+String backgroundBlack = "\e[40;30m";
+String backgroundRed = "\e[41;31m";
+String backgroundGreen = "\e[42;32m";
+String backgroundYellow = "\e[43;33m";
+String backgroundBlue = "\e[44;34m";
+String backgroundPurple = "\e[45;35m";
+String backgroundCyan = "\e[46;36m";
+String backgroundWhite = "\e[47;37m";
+
+#endif

ESP32/i2c_scaner_esp32_dev/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

ESP32/i2c_scaner_esp32_dev/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

ESP32/i2c_scaner_esp32_dev/platformio.ini

@@ -0,0 +1,6 @@
+[env:esp32doit-devkit-v1]
+platform = espressif32
+board = esp32doit-devkit-v1
+framework = arduino
+monitor_speed = 115200
+monitor_flags = --raw 

ESP32/i2c_scaner_esp32_dev/src/main.cpp

@@ -0,0 +1,38 @@
+#include <Arduino.h>
+#include <Wire.h>
+#include <Colors.h>
+void setup()
+{
+  Serial.begin(115200);
+  Wire.begin();
+}
+
+void loop()
+{
+   byte error, address;
+  int nDevices;
+
+  Serial.println(Red+"Escaneando...");
+  Serial.println("**************"+ fontReset);
+
+  nDevices = 0;
+  for (address = 1; address < 127; address++)
+  {
+
+    Wire.beginTransmission(address);
+    error = Wire.endTransmission();
+
+    if (error == 0)
+    {
+      Serial.print("Encontrado dispositivo I2C dirección: ");
+      Serial.print(boldBlue + "0x");
+      if (address < 16)
+      Serial.print("0");
+      Serial.print(address, HEX);
+      Serial.println(fontReset);
+      nDevices++;
+    }
+  }
+  Serial.println(Red + "**************" +fontReset);
+  delay(5000); 
+}

ESP32/i2c_scaner_esp32_dev/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

ESP8266/MatrixLedsRGB/.vscode/extensions.json

@@ -3,5 +3,8 @@
     // for the documentation about the extensions.json format
     "recommendations": [
         "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
     ]
 }

ESP8266/MatrixLedsRGB/platformio.ini

@@ -18,9 +18,10 @@ lib_deps =
 	knolleary/PubSubClient@^2.8
 	arduino-libraries/NTPClient@^3.1.0
 monitor_speed = 115200
-upload_speed = 256000
-upload_protocol = espota
-upload_port = 192.168.1.108
-upload_flags = 
-	--port=8266
-	--auth=un260874
+upload_speed = 115200
+monitor_flags = --raw
+;upload_protocol = espota
+;upload_port = 192.168.1.9
+;upload_flags = 
+;	--port=8266
+;	--auth=un260874

ESP8266/MatrixLedsRGB/src/main.cpp

@@ -3,32 +3,41 @@
 #include <ArduinoJson.h>
 #include <NTPClient.h>
 #include <WiFiUdp.h>
-
+#define DEBUG 0
+#if DEBUG==1
+#define debug(x) Serial.println(x)
+#else
+#define debug(x)
+#endif
 WiFiUDP ntpUDP;
 NTPClient timeClient(ntpUDP, "0.south-america.pool.ntp.org", -18000, 6000);
+const char *ssid = "CHAPARRO";
+const char *password = "Un260874";
+long timeAnterior;
+long matrix_time;
+int matrix_speed = 150;
 
 #include "matrix.hpp"
 #include "mqtt.hpp"
 #include "ota.hpp"
 
-const char *ssid = "mdchaparror";
-const char *password = "un260874";
-long timeAnterior;
-long matrix_time;
-
 void setup()
 {
+  delay(5000);
+  
   Serial.begin(115200);
+  Serial.println("HOLA");
   WiFi.mode(WIFI_STA);
   WiFi.begin(ssid, password);
+  
   while (WiFi.waitForConnectResult() != WL_CONNECTED)
   {
+    Serial.println("Conectando WIFI");
     delay(5000);
     ESP.restart();
   }
-  //Serial.println(WiFi.localIP());
-  mensaje += WiFi.localIP().toString();
 
+ debug(WiFi.localIP());
   ota_init();
   mqtt_init();
 
@@ -38,27 +47,33 @@ void setup()
 
 void loop()
 {
-  ArduinoOTA.handle();
-  yield();
-  if ((millis() - matrix_time) > 150)
+   ArduinoOTA.handle();
+  
+  if ((millis() - matrix_time) > (long unsigned int)matrix_speed)
   {
     matrix_time = millis();
     show_matrix();
   }
 
-  if ((millis() - timeAnterior) > 1000)
+  if ((millis() - timeAnterior) > 2500)
   {
     timeAnterior = millis();
-    if (!client.connected())
-    { yield();
-      reconnect();
-    }
+    yield();
     timeClient.update(); //sincronizamos con el server NTP
+    yield();
     hora = timeClient.getFormattedTime();
     texto = mensaje + " " + hora;
     longitud = texto.length() * 5 + 64;
   }
 
+
+if (!client.connected())
+    { 
+      reconnect();
+    }
   client.loop();
+  yield();
+  debug("\n\n Free RAM -> ");
+  debug(ESP.getFreeHeap());
 }
 

ESP8266/MatrixLedsRGB/src/matrix.hpp

@@ -3,8 +3,8 @@
 #include <Adafruit_NeoMatrix.h>
 #include <Adafruit_NeoPixel.h>
 #define PIN D7 //DIN MATRIZ
-String texto = "Puerto Ota: ";
-String mensaje = "Puerto Ota: ";
+String texto = "UNELECTRONICA";
+String mensaje = "UNELECTRONICA";
 String hora = "00:00:00";
 int R = 255;
 int G = 0;

ESP8266/MatrixLedsRGB/src/mqtt.hpp

@@ -26,17 +26,16 @@ void callback(char *p_topic, byte *p_payload, unsigned int p_length)
   {
 
     yield();
-    DeserializationError err = deserializeJson(doc, String(payload));
+    deserializeJson(doc, String(payload));
     yield();
-    // if (err)
-    // {
-    //   Serial.print(F("deserializeJson() failed with code "));
-    //   Serial.println(err.c_str());
-    // }
     mensaje = doc["msg"].as<String>();
     R = doc["R"];
     G = doc["G"];
     B = doc["B"];
+    matrix_speed = doc["speed"].as<int>();
+    if(matrix_speed<50)
+    matrix_speed=50;
+
     texto = mensaje + " " + hora;
     x = matrix.width();
     longitud = texto.length() * 5 + 64;
@@ -50,21 +49,24 @@ void reconnect()
     String clientId = "matrix_client-" + String(random(0xffff), HEX);
     if (client.connect(clientId.c_str(), MQTT_USER, MQTT_PASSWORD))
     {
-      //Serial.println("INFO: connected");
+      
       client.subscribe(MQTT_TOPIC_FULL);
     }
     else
     {
-      //Serial.print("ERROR: failed, rc=");
-      //Serial.print(client.state());
-      //Serial.println("DEBUG: try again in 5 seconds");
+      mensaje = "ERROR AL CONECTAR SERVIDOR MQTT";
+      texto = mensaje + " " + hora;
+      x = matrix.width();
+      longitud = texto.length() * 5 + 64;
+      debug("Error conexion MQTT");
+
+      yield();
+      delay(5000);
       yield();
-      delay(1000);
     }
     
   }
 }
-
 void mqtt_init()
 {
   client.setServer(MQTT_SERVER_IP, MQTT_SERVER_PORT);

PICO/README.md

@@ -2,11 +2,31 @@
 
 ## Boards
 
-+ RASPBERRY PI PICO
+## RASPBERRY PI PICO
 
-### PinOUT PICO
+#### PinOUT
 ![pinmap](Raspberry-Pi-Pico-pinout-diagram.png)
 
+## RP2040 ZERO
++ RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
++ Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
++ 264KB of SRAM, and 2MB of on-board Flash memory.
++ USB-C connector, keeps it up to date, easier to use.
++ The castellated module allows soldering direct to carrier boards.
++ USB 1.1 with device and host support.
++ Low-power sleep and dormant modes.
++ Drag-and-drop programming using mass storage over USB.
++ 29 × multi-function GPIO pins (20× via edge pinout, others via solder points).
++ 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels.
++ Accurate clock and timer on-chip.
++ Temperature sensor.
++ Accelerated floating-point libraries on-chip.
++ Programmable I/O (PIO) state machines for custom peripheral support.
+  
+  #### PinOUT
+![pinmap](RP2040-Zero-details.jpg)
+  
+
 ### Data
 + [SDK](data/PICO_C_SDK.pdf)
 + [DATASHEET](data/pico-datasheet.pdf)

STM32/STM32CUBE/BlinkSTM32/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

STM32/STM32CUBE/BlinkSTM32/include/main.h

@@ -0,0 +1,18 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#include "stm32f1xx_hal.h"
+void Error_Handler(void);
+#define LED_Pin GPIO_PIN_13
+#define LED_GPIO_Port GPIOC
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif 

STM32/STM32CUBE/BlinkSTM32/include/stm32f1xx_hal_conf.h

@@ -0,0 +1,370 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2021 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+  
+#define HAL_MODULE_ENABLED  
+/*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_CORTEX_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+/*#define HAL_DMA_MODULE_ENABLED   */
+/*#define HAL_ETH_MODULE_ENABLED   */
+/*#define HAL_FLASH_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+/*#define HAL_I2C_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_PCCARD_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+/*#define HAL_HCD_MODULE_ENABLED   */
+/*#define HAL_PWR_MODULE_ENABLED   */
+/*#define HAL_RCC_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SD_MODULE_ENABLED   */
+/*#define HAL_MMC_MODULE_ENABLED   */
+/*#define HAL_SDRAM_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_TIM_MODULE_ENABLED   */
+/*#define HAL_UART_MODULE_ENABLED   */
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+/*#define HAL_EXTI_MODULE_ENABLED   */
+
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE               40000U    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)8)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/ 
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+   
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */  
+   
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */  
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */     
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */   
+   
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/BlinkSTM32/include/stm32f1xx_it.h

@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_IT_H
+#define __STM32F1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/BlinkSTM32/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

STM32/STM32CUBE/BlinkSTM32/platformio.ini

@@ -0,0 +1,15 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:genericSTM32F103C8]
+platform = ststm32
+board = genericSTM32F103C8
+framework = stm32cube
+monitor_speed = 115200

STM32/STM32CUBE/BlinkSTM32/src/main.c

@@ -0,0 +1,84 @@
+
+#include "main.h"
+
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+int main(void)
+{
+  HAL_Init();
+  SystemClock_Config();
+  MX_GPIO_Init();
+
+  while (1)
+  {
+    /* USER CODE END WHILE */
+   HAL_GPIO_TogglePin(LED_GPIO_Port,LED_Pin);
+   HAL_Delay(1000);
+    /* USER CODE BEGIN 3 */
+  }
+ 
+}
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+
+static void MX_GPIO_Init(void)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : LED_Pin */
+  GPIO_InitStruct.Pin = LED_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+

STM32/STM32CUBE/BlinkSTM32/src/stm32f1xx_hal_msp.c

@@ -0,0 +1,88 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32f1xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_AFIO_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  */
+  __HAL_AFIO_REMAP_SWJ_NOJTAG();
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/BlinkSTM32/src/stm32f1xx_it.c

@@ -0,0 +1,203 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M3 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Prefetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f1xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/BlinkSTM32/src/system_stm32f1xx.c

@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#if defined(STM32F100xB) ||defined(STM32F100xE)
+  uint32_t SystemCoreClock         = 24000000U;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = 72000000U;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+  RCC->CFGR &= 0xF8FF0000U;
+#else
+  RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEBFFFFFFU;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+    
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/BlinkSTM32/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

STM32/STM32CUBE/USB_VIRTUAL_PORT/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/main.h

@@ -0,0 +1,16 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "stm32f1xx_hal.h"
+
+void Error_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/stm32f1xx_hal_conf.h

@@ -0,0 +1,370 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2021 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+  
+#define HAL_MODULE_ENABLED  
+/*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_CORTEX_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+/*#define HAL_DMA_MODULE_ENABLED   */
+/*#define HAL_ETH_MODULE_ENABLED   */
+/*#define HAL_FLASH_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+/*#define HAL_I2C_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_PCCARD_MODULE_ENABLED   */
+#define HAL_PCD_MODULE_ENABLED
+/*#define HAL_HCD_MODULE_ENABLED   */
+/*#define HAL_PWR_MODULE_ENABLED   */
+/*#define HAL_RCC_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SD_MODULE_ENABLED   */
+/*#define HAL_MMC_MODULE_ENABLED   */
+/*#define HAL_SDRAM_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_TIM_MODULE_ENABLED   */
+/*#define HAL_UART_MODULE_ENABLED   */
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+/*#define HAL_EXTI_MODULE_ENABLED   */
+
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE               40000U    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)8)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/ 
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+   
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */  
+   
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */  
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */     
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */   
+   
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/stm32f1xx_it.h

@@ -0,0 +1,70 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_IT_H
+#define __STM32F1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void USB_LP_CAN1_RX0_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/usb_device.h

@@ -0,0 +1,105 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usb_device.h
+  * @version        : v2.0_Cube
+  * @brief          : Header for usb_device.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_DEVICE__H__
+#define __USB_DEVICE__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+  * @{
+  */
+
+/** @defgroup USBD_DEVICE USBD_DEVICE
+  * @brief Device file for Usb otg low level driver.
+  * @{
+  */
+
+/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
+  * @brief Public variables.
+  * @{
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/*
+ * -- Insert your variables declaration here --
+ */
+/* USER CODE BEGIN VARIABLES */
+
+/* USER CODE END VARIABLES */
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
+  * @brief Declaration of public functions for Usb device.
+  * @{
+  */
+
+/** USB Device initialization function. */
+void MX_USB_DEVICE_Init(void);
+
+/*
+ * -- Insert functions declaration here --
+ */
+/* USER CODE BEGIN FD */
+
+/* USER CODE END FD */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_DEVICE__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/usbd_cdc_if.h

@@ -0,0 +1,130 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usbd_cdc_if.h
+  * @version        : v2.0_Cube
+  * @brief          : Header for usbd_cdc_if.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CDC_IF_H__
+#define __USBD_CDC_IF_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+  * @brief For Usb device.
+  * @{
+  */
+  
+/** @defgroup USBD_CDC_IF USBD_CDC_IF
+  * @brief Usb VCP device module
+  * @{
+  */ 
+
+/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
+  * @brief Defines.
+  * @{
+  */
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
+  * @brief Types.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
+  * @brief Aliases.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
+  * @brief Public variables.
+  * @{
+  */
+
+/** CDC Interface callback. */
+extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
+  * @brief Public functions declaration.
+  * @{
+  */
+
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CDC_IF_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/usbd_conf.h

@@ -0,0 +1,179 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usbd_conf.h
+  * @version        : v2.0_Cube
+  * @brief          : Header for usbd_conf.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "main.h"
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+  * @{
+  */
+
+/** @defgroup USBD_CONF USBD_CONF
+  * @brief Configuration file for Usb otg low level driver.
+  * @{
+  */
+
+/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
+  * @brief Public variables.
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
+  * @brief Defines for configuration of the Usb device.
+  * @{
+  */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES     1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION     1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ     512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING     0
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL     0
+/*---------- -----------*/
+#define USBD_SELF_POWERED     1
+/*---------- -----------*/
+#define MAX_STATIC_ALLOC_SIZE     512
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 		0
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
+  * @brief Aliases.
+  * @{
+  */
+
+/* Memory management macros */
+
+/** Alias for memory allocation. */
+#define USBD_malloc         (uint32_t *)USBD_static_malloc
+
+/** Alias for memory release. */
+#define USBD_free           USBD_static_free
+
+/** Alias for memory set. */
+#define USBD_memset         /* Not used */
+
+/** Alias for memory copy. */
+#define USBD_memcpy         /* Not used */
+
+/** Alias for delay. */
+#define USBD_Delay          HAL_Delay
+
+/* For footprint reasons and since only one allocation is handled in the HID class
+   driver, the malloc/free is changed into a static allocation method */
+void *USBD_static_malloc(uint32_t size);
+void USBD_static_free(void *p);
+
+/* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...)    printf(__VA_ARGS__);\
+                            printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...)    printf("ERROR: ") ;\
+                            printf(__VA_ARGS__);\
+                            printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...)    printf("DEBUG : ") ;\
+                            printf(__VA_ARGS__);\
+                            printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
+  * @brief Types.
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
+  * @brief Declaration of public functions for Usb device.
+  * @{
+  */
+
+/* Exported functions -------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/include/usbd_desc.h

@@ -0,0 +1,145 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usbd_desc.c
+  * @version        : v2.0_Cube
+  * @brief          : Header for usbd_conf.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */  
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__C__
+#define __USBD_DESC__C__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+  * @{
+  */
+
+/** @defgroup USBD_DESC USBD_DESC
+  * @brief Usb device descriptors module.
+  * @{
+  */
+  
+/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants
+  * @brief Constants.
+  * @{
+  */
+#define         DEVICE_ID1          (UID_BASE)
+#define         DEVICE_ID2          (UID_BASE + 0x4)
+#define         DEVICE_ID3          (UID_BASE + 0x8)
+
+#define  USB_SIZ_STRING_SERIAL       0x1A
+
+/* USER CODE BEGIN EXPORTED_CONSTANTS */
+
+/* USER CODE END EXPORTED_CONSTANTS */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
+  * @brief Defines.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
+  * @brief Types.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
+  * @brief Aliases.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
+  * @brief Public variables.
+  * @{
+  */
+
+/** Descriptor for the Usb device. */
+extern USBD_DescriptorsTypeDef FS_Desc;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
+  * @brief Public functions declaration.
+  * @{
+  */
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC__C__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

STM32/STM32CUBE/USB_VIRTUAL_PORT/platformio.ini

@@ -0,0 +1,5 @@
+[env:genericSTM32F103C8]
+platform = ststm32
+board = genericSTM32F103C8
+framework = stm32cube
+monitor_speed=115200

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/main.c

@@ -0,0 +1,94 @@
+#include "main.h"
+#include "usb_device.h"
+#include <stdbool.h>
+#include "usbd_cdc_if.h"
+#include <stdio.h>
+#include <string.h>
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+uint8_t *data = "Hello World from USB CDC\n";
+char  saludo[]="Hola mundo";
+uint8_t buffer[64];
+char * buffer2[10];
+int contador = 0;
+uint8_t data_new =0;
+
+int main(void)
+{
+  
+  HAL_Init();
+  SystemClock_Config();
+  MX_GPIO_Init();
+  MX_USB_DEVICE_Init();
+ 
+  while (1)
+  {
+    if(data_new == 1){
+         CDC_Transmit_FS(buffer, strlen((char *)buffer));
+         data_new = 0;
+    }
+    itoa(contador,buffer2,10);
+    contador = contador +2;
+    CDC_Transmit_FS(buffer2, strlen((char *)buffer2));
+    HAL_Delay(100);
+    CDC_Transmit_FS("\n",1);
+	  HAL_Delay (900);
+  }
+ 
+}
+
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+static void MX_GPIO_Init(void)
+{
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+}
+
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/stm32f1xx_hal_msp.c

@@ -0,0 +1,88 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32f1xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_AFIO_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  */
+  __HAL_AFIO_REMAP_SWJ_NOJTAG();
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/stm32f1xx_it.c

@@ -0,0 +1,217 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern PCD_HandleTypeDef hpcd_USB_FS;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M3 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Prefetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f1xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles USB low priority or CAN RX0 interrupts.
+  */
+void USB_LP_CAN1_RX0_IRQHandler(void)
+{
+  /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */
+
+  /* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */
+  HAL_PCD_IRQHandler(&hpcd_USB_FS);
+  /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */
+
+  /* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/system_stm32f1xx.c

@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#if defined(STM32F100xB) ||defined(STM32F100xE)
+  uint32_t SystemCoreClock         = 24000000U;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = 72000000U;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+  RCC->CFGR &= 0xF8FF0000U;
+#else
+  RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEBFFFFFFU;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+    
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/usb_device.c

@@ -0,0 +1,102 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usb_device.c
+  * @version        : v2.0_Cube
+  * @brief          : This file implements the USB Device
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "usb_device.h"
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_cdc.h"
+#include "usbd_cdc_if.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* USB Device Core handle declaration. */
+USBD_HandleTypeDef hUsbDeviceFS;
+
+/*
+ * -- Insert your variables declaration here --
+ */
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*
+ * -- Insert your external function declaration here --
+ */
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+  * Init USB device Library, add supported class and start the library
+  * @retval None
+  */
+void MX_USB_DEVICE_Init(void)
+{
+  /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
+  
+  /* USER CODE END USB_DEVICE_Init_PreTreatment */
+  
+  /* Init Device Library, add supported class and start the library. */
+  if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK)
+  {
+    Error_Handler();
+  }
+  if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK)
+  {
+    Error_Handler();
+  }
+  if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK)
+  {
+    Error_Handler();
+  }
+  if (USBD_Start(&hUsbDeviceFS) != USBD_OK)
+  {
+    Error_Handler();
+  }
+
+  /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
+  
+  /* USER CODE END USB_DEVICE_Init_PostTreatment */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/usbd_cdc_if.c

@@ -0,0 +1,185 @@
+
+#include "usbd_cdc_if.h"
+#include <stdbool.h>
+
+#define APP_RX_DATA_SIZE  1000
+#define APP_TX_DATA_SIZE  1000
+
+uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
+uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
+extern USBD_HandleTypeDef hUsbDeviceFS;
+static int8_t CDC_Init_FS(void);
+static int8_t CDC_DeInit_FS(void);
+static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
+static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len);
+extern uint8_t buffer[64];
+extern uint8_t data_new;
+
+USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
+{
+  CDC_Init_FS,
+  CDC_DeInit_FS,
+  CDC_Control_FS,
+  CDC_Receive_FS
+};
+
+static int8_t CDC_Init_FS(void)
+{
+
+  USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
+  USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
+  return (USBD_OK);
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief  DeInitializes the CDC media low layer
+  * @retval USBD_OK if all operations are OK else USBD_FAIL
+  */
+static int8_t CDC_DeInit_FS(void)
+{
+  /* USER CODE BEGIN 4 */
+  return (USBD_OK);
+  /* USER CODE END 4 */
+}
+
+/**
+  * @brief  Manage the CDC class requests
+  * @param  cmd: Command code
+  * @param  pbuf: Buffer containing command data (request parameters)
+  * @param  length: Number of data to be sent (in bytes)
+  * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+  */
+static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
+{
+  /* USER CODE BEGIN 5 */
+  switch(cmd)
+  {
+    case CDC_SEND_ENCAPSULATED_COMMAND:
+
+    break;
+
+    case CDC_GET_ENCAPSULATED_RESPONSE:
+
+    break;
+
+    case CDC_SET_COMM_FEATURE:
+
+    break;
+
+    case CDC_GET_COMM_FEATURE:
+
+    break;
+
+    case CDC_CLEAR_COMM_FEATURE:
+
+    break;
+
+  /*******************************************************************************/
+  /* Line Coding Structure                                                       */
+  /*-----------------------------------------------------------------------------*/
+  /* Offset | Field       | Size | Value  | Description                          */
+  /* 0      | dwDTERate   |   4  | Number |Data terminal rate, in bits per second*/
+  /* 4      | bCharFormat |   1  | Number | Stop bits                            */
+  /*                                        0 - 1 Stop bit                       */
+  /*                                        1 - 1.5 Stop bits                    */
+  /*                                        2 - 2 Stop bits                      */
+  /* 5      | bParityType |  1   | Number | Parity                               */
+  /*                                        0 - None                             */
+  /*                                        1 - Odd                              */
+  /*                                        2 - Even                             */
+  /*                                        3 - Mark                             */
+  /*                                        4 - Space                            */
+  /* 6      | bDataBits  |   1   | Number Data bits (5, 6, 7, 8 or 16).          */
+  /*******************************************************************************/
+    case CDC_SET_LINE_CODING:
+
+    break;
+
+    case CDC_GET_LINE_CODING:
+
+    break;
+
+    case CDC_SET_CONTROL_LINE_STATE:
+
+    break;
+
+    case CDC_SEND_BREAK:
+
+    break;
+
+  default:
+    break;
+  }
+
+  return (USBD_OK);
+  /* USER CODE END 5 */
+}
+
+/**
+  * @brief  Data received over USB OUT endpoint are sent over CDC interface
+  *         through this function.
+  *
+  *         @note
+  *         This function will block any OUT packet reception on USB endpoint
+  *         untill exiting this function. If you exit this function before transfer
+  *         is complete on CDC interface (ie. using DMA controller) it will result
+  *         in receiving more data while previous ones are still not sent.
+  *
+  * @param  Buf: Buffer of data to be received
+  * @param  Len: Number of data received (in bytes)
+  * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+  */
+static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
+{
+  /* USER CODE BEGIN 6 */
+  USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
+  USBD_CDC_ReceivePacket(&hUsbDeviceFS);
+
+  memset (buffer,'\0',64);  
+  uint8_t len = (uint8_t)*Len;
+  memcpy(buffer,Buf,len);
+  memset(Buf,'\0',len);
+  data_new = 1;
+  return (USBD_OK);
+  /* USER CODE END 6 */
+}
+
+/**
+  * @brief  CDC_Transmit_FS
+  *         Data to send over USB IN endpoint are sent over CDC interface
+  *         through this function.
+  *         @note
+  *
+  *
+  * @param  Buf: Buffer of data to be sent
+  * @param  Len: Number of data to be sent (in bytes)
+  * @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
+  */
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
+{
+  uint8_t result = USBD_OK;
+  /* USER CODE BEGIN 7 */
+  USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
+  if (hcdc->TxState != 0){
+    return USBD_BUSY;
+  }
+  USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
+  result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
+  /* USER CODE END 7 */
+  return result;
+}
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/usbd_conf.c

@@ -0,0 +1,663 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usbd_conf.c
+  * @version        : v2.0_Cube
+  * @brief          : This file implements the board support package for the USB device library
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */  
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+#include "usbd_cdc.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+PCD_HandleTypeDef hpcd_USB_FS;
+void Error_Handler(void);
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* Private functions ---------------------------------------------------------*/
+static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+else
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+/*******************************************************************************
+                       LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+  if(pcdHandle->Instance==USB)
+  {
+  /* USER CODE BEGIN USB_MspInit 0 */
+
+  /* USER CODE END USB_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USB_CLK_ENABLE();
+
+    /* Peripheral interrupt init */
+    HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
+  /* USER CODE BEGIN USB_MspInit 1 */
+
+  /* USER CODE END USB_MspInit 1 */
+  }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+  if(pcdHandle->Instance==USB)
+  {
+  /* USER CODE BEGIN USB_MspDeInit 0 */
+
+  /* USER CODE END USB_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USB_CLK_DISABLE();
+
+    /* Peripheral interrupt Deinit*/
+    HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
+
+  /* USER CODE BEGIN USB_MspDeInit 1 */
+
+  /* USER CODE END USB_MspDeInit 1 */
+  }
+}
+
+/**
+  * @brief  Setup stage callback
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+  * @brief  Data Out stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: Endpoint number
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#else
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+}
+
+/**
+  * @brief  Data In stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: Endpoint number
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#else
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+  * @brief  SOF callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+  * @brief  Reset callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{ 
+  USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+  if ( hpcd->Init.speed != PCD_SPEED_FULL)
+  {
+    Error_Handler();
+  }
+    /* Set Speed. */
+  USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
+
+  /* Reset Device. */
+  USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+  * @brief  Suspend callback.
+  * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  /* Inform USB library that core enters in suspend Mode. */
+  USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
+  /* Enter in STOP mode. */
+  /* USER CODE BEGIN 2 */
+  if (hpcd->Init.low_power_enable)
+  {
+    /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
+    SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+  }
+  /* USER CODE END 2 */
+}
+
+/**
+  * @brief  Resume callback.
+  * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  /* USER CODE BEGIN 3 */
+
+  /* USER CODE END 3 */
+  USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+  * @brief  ISOOUTIncomplete callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: Endpoint number
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#else
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+  * @brief  ISOINIncomplete callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: Endpoint number
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#else
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+  * @brief  Connect callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+  * @brief  Disconnect callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+#else
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/*******************************************************************************
+                       LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+
+/**
+  * @brief  Initializes the low level portion of the device driver.
+  * @param  pdev: Device handle
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+  /* Init USB Ip. */
+  /* Link the driver to the stack. */
+  hpcd_USB_FS.pData = pdev;
+  pdev->pData = &hpcd_USB_FS;
+
+  hpcd_USB_FS.Instance = USB;
+  hpcd_USB_FS.Init.dev_endpoints = 8;
+  hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+  hpcd_USB_FS.Init.low_power_enable = DISABLE;
+  hpcd_USB_FS.Init.lpm_enable = DISABLE;
+  hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+  if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
+  {
+    Error_Handler( );
+  }
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+  /* Register USB PCD CallBacks */
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
+  HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
+
+  HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_FS, PCD_DataOutStageCallback);
+  HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback);
+  HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback);
+  HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+  /* USER CODE BEGIN EndPoint_Configuration */
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
+  /* USER CODE END EndPoint_Configuration */
+  /* USER CODE BEGIN EndPoint_Configuration_CDC */
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
+  HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
+  /* USER CODE END EndPoint_Configuration_CDC */
+  return USBD_OK;
+}
+
+/**
+  * @brief  De-Initializes the low level portion of the device driver.
+  * @param  pdev: Device handle
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  hal_status = HAL_PCD_DeInit(pdev->pData);
+
+  usb_status =  USBD_Get_USB_Status(hal_status);
+ 
+  return usb_status; 
+}
+
+/**
+  * @brief  Starts the low level portion of the device driver.
+  * @param  pdev: Device handle
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+ 
+  hal_status = HAL_PCD_Start(pdev->pData);
+     
+  usb_status =  USBD_Get_USB_Status(hal_status);
+  
+  return usb_status;
+}
+
+/**
+  * @brief  Stops the low level portion of the device driver.
+  * @param  pdev: Device handle
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  hal_status = HAL_PCD_Stop(pdev->pData);
+
+  usb_status =  USBD_Get_USB_Status(hal_status);
+  
+  return usb_status;
+}
+
+/**
+  * @brief  Opens an endpoint of the low level driver.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @param  ep_type: Endpoint type
+  * @param  ep_mps: Endpoint max packet size
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
+
+  usb_status =  USBD_Get_USB_Status(hal_status);
+ 
+  return usb_status;
+}
+
+/**
+  * @brief  Closes an endpoint of the low level driver.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+  
+  hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
+      
+  usb_status =  USBD_Get_USB_Status(hal_status);
+
+  return usb_status;  
+}
+
+/**
+  * @brief  Flushes an endpoint of the Low Level Driver.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+  
+  hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
+      
+  usb_status =  USBD_Get_USB_Status(hal_status);
+  
+  return usb_status;  
+}
+
+/**
+  * @brief  Sets a Stall condition on an endpoint of the Low Level Driver.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+  
+  hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
+
+  usb_status =  USBD_Get_USB_Status(hal_status);
+ 
+  return usb_status;  
+}
+
+/**
+  * @brief  Clears a Stall condition on an endpoint of the Low Level Driver.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+  
+  hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);  
+     
+  usb_status =  USBD_Get_USB_Status(hal_status);
+
+  return usb_status; 
+}
+
+/**
+  * @brief  Returns Stall condition.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval Stall (1: Yes, 0: No)
+  */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
+  
+  if((ep_addr & 0x80) == 0x80)
+  {
+    return hpcd->IN_ep[ep_addr & 0x7F].is_stall; 
+  }
+  else
+  {
+    return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; 
+  }
+}
+
+/**
+  * @brief  Assigns a USB address to the device.
+  * @param  pdev: Device handle
+  * @param  dev_addr: Device address
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+  
+  hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
+     
+  usb_status =  USBD_Get_USB_Status(hal_status);
+ 
+  return usb_status;  
+}
+
+/**
+  * @brief  Transmits data over an endpoint.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @param  pbuf: Pointer to data to be sent
+  * @param  size: Data size    
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
+     
+  usb_status =  USBD_Get_USB_Status(hal_status);
+  
+  return usb_status;    
+}
+
+/**
+  * @brief  Prepares an endpoint for reception.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @param  pbuf: Pointer to data to be received
+  * @param  size: Data size
+  * @retval USBD status
+  */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+  HAL_StatusTypeDef hal_status = HAL_OK;
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
+     
+  usb_status =  USBD_Get_USB_Status(hal_status);
+  	
+  return usb_status; 
+}
+
+/**
+  * @brief  Returns the last transfered packet size.
+  * @param  pdev: Device handle
+  * @param  ep_addr: Endpoint number
+  * @retval Recived Data Size
+  */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+  return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
+}
+
+/**
+  * @brief  Delays routine for the USB device library.
+  * @param  Delay: Delay in ms
+  * @retval None
+  */
+void USBD_LL_Delay(uint32_t Delay)
+{
+  HAL_Delay(Delay);
+}
+
+/**
+  * @brief  Static single allocation.
+  * @param  size: Size of allocated memory
+  * @retval None
+  */
+void *USBD_static_malloc(uint32_t size)
+{
+  static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
+  return mem;
+}
+
+/**
+  * @brief  Dummy memory free
+  * @param  p: Pointer to allocated  memory address
+  * @retval None
+  */
+void USBD_static_free(void *p)
+{
+
+}
+
+/**
+  * @brief Software Device Connection
+  * @param hpcd: PCD handle
+  * @param state: Connection state (0: disconnected / 1: connected)
+  * @retval None
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+#else
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  /* USER CODE BEGIN 6 */
+  if (state == 1)
+  {
+    /* Configure Low connection state. */
+
+  }
+  else
+  {
+    /* Configure High connection state. */
+
+  }
+  /* USER CODE END 6 */
+}
+
+/**
+  * @brief  Retuns the USB status depending on the HAL status:
+  * @param  hal_status: HAL status
+  * @retval USB status
+  */
+USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status)
+{
+  USBD_StatusTypeDef usb_status = USBD_OK;
+
+  switch (hal_status)
+  {
+    case HAL_OK :
+      usb_status = USBD_OK;
+    break;
+    case HAL_ERROR :
+      usb_status = USBD_FAIL;
+    break;
+    case HAL_BUSY :
+      usb_status = USBD_BUSY;
+    break;
+    case HAL_TIMEOUT :
+      usb_status = USBD_FAIL;
+    break;
+    default :
+      usb_status = USBD_FAIL;
+    break;
+  }
+  return usb_status;
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/src/usbd_desc.c

@@ -0,0 +1,397 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : usbd_desc.c
+  * @version        : v2.0_Cube
+  * @brief          : This file implements the USB device descriptors.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+  * @{
+  */
+
+/** @addtogroup USBD_DESC
+  * @{
+  */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
+  * @brief Private types.
+  * @{
+  */
+
+/* USER CODE BEGIN PRIVATE_TYPES */
+
+/* USER CODE END PRIVATE_TYPES */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
+  * @brief Private defines.
+  * @{
+  */
+
+#define USBD_VID     1155
+#define USBD_LANGID_STRING     1033
+#define USBD_MANUFACTURER_STRING     "STMicroelectronics"
+#define USBD_PID_FS     22336
+#define USBD_PRODUCT_STRING_FS     "STM32 Virtual ComPort"
+#define USBD_CONFIGURATION_STRING_FS     "CDC Config"
+#define USBD_INTERFACE_STRING_FS     "CDC Interface"
+
+/* USER CODE BEGIN PRIVATE_DEFINES */
+
+/* USER CODE END PRIVATE_DEFINES */
+
+/**
+  * @}
+  */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
+  * @brief Private macros.
+  * @{
+  */
+
+/* USER CODE BEGIN PRIVATE_MACRO */
+
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+  * @}
+  */
+  
+/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
+  * @brief Private functions declaration.
+  * @{
+  */
+  
+static void Get_SerialNum(void);
+static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len);
+  
+/**
+  * @}
+  */  
+  
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
+  * @brief Private functions declaration for FS.
+  * @{
+  */
+
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+
+#ifdef USBD_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
+#endif /* USBD_SUPPORT_USER_STRING_DESC */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+  * @brief Private variables.
+  * @{
+  */
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+  USBD_FS_DeviceDescriptor
+, USBD_FS_LangIDStrDescriptor
+, USBD_FS_ManufacturerStrDescriptor
+, USBD_FS_ProductStrDescriptor
+, USBD_FS_SerialStrDescriptor
+, USBD_FS_ConfigStrDescriptor
+, USBD_FS_InterfaceStrDescriptor
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+  #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/** USB standard device descriptor. */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+{
+  0x12,                       /*bLength */
+  USB_DESC_TYPE_DEVICE,       /*bDescriptorType*/
+  0x00,                       /*bcdUSB */
+  0x02,
+  0x02,                       /*bDeviceClass*/
+  0x02,                       /*bDeviceSubClass*/
+  0x00,                       /*bDeviceProtocol*/
+  USB_MAX_EP0_SIZE,           /*bMaxPacketSize*/
+  LOBYTE(USBD_VID),           /*idVendor*/
+  HIBYTE(USBD_VID),           /*idVendor*/
+  LOBYTE(USBD_PID_FS),        /*idProduct*/
+  HIBYTE(USBD_PID_FS),        /*idProduct*/
+  0x00,                       /*bcdDevice rel. 2.00*/
+  0x02,
+  USBD_IDX_MFC_STR,           /*Index of manufacturer  string*/
+  USBD_IDX_PRODUCT_STR,       /*Index of product string*/
+  USBD_IDX_SERIAL_STR,        /*Index of serial number string*/
+  USBD_MAX_NUM_CONFIGURATION  /*bNumConfigurations*/
+};
+
+/* USB_DeviceDescriptor */
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+  * @brief Private variables.
+  * @{
+  */
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+  #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+
+/** USB lang indentifier descriptor. */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+     USB_LEN_LANGID_STR_DESC,
+     USB_DESC_TYPE_STRING,
+     LOBYTE(USBD_LANGID_STRING),
+     HIBYTE(USBD_LANGID_STRING)
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+  #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/* Internal string descriptor. */
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+  #pragma data_alignment=4   
+#endif
+__ALIGN_BEGIN uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] __ALIGN_END = {
+  USB_SIZ_STRING_SERIAL,
+  USB_DESC_TYPE_STRING,
+};
+
+/**
+  * @}
+  */
+
+/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
+  * @brief Private functions.
+  * @{
+  */
+
+/**
+  * @brief  Return the device descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  UNUSED(speed);
+  *length = sizeof(USBD_FS_DeviceDesc);
+  return USBD_FS_DeviceDesc;
+}
+
+/**
+  * @brief  Return the LangID string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  UNUSED(speed);
+  *length = sizeof(USBD_LangIDDesc);
+  return USBD_LangIDDesc;
+}
+
+/**
+  * @brief  Return the product string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  if(speed == 0)
+  {
+    USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+  }
+  else
+  {
+    USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+  }
+  return USBD_StrDesc;
+}
+
+/**
+  * @brief  Return the manufacturer string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  UNUSED(speed);
+  USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+  return USBD_StrDesc;
+}
+
+/**
+  * @brief  Return the serial number string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  UNUSED(speed);
+  *length = USB_SIZ_STRING_SERIAL;
+
+  /* Update the serial number string descriptor with the data from the unique
+   * ID */
+  Get_SerialNum();
+
+  return (uint8_t *) USBD_StringSerial;
+}
+
+/**
+  * @brief  Return the configuration string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  if(speed == USBD_SPEED_HIGH)
+  {
+    USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+  }
+  else
+  {
+    USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+  }
+  return USBD_StrDesc;
+}
+
+/**
+  * @brief  Return the interface string descriptor
+  * @param  speed : Current device speed
+  * @param  length : Pointer to data length variable
+  * @retval Pointer to descriptor buffer
+  */
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+  if(speed == 0)
+  {
+    USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+  }
+  else
+  {
+    USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+  }
+  return USBD_StrDesc;
+}
+
+/**
+  * @brief  Create the serial number string descriptor 
+  * @param  None 
+  * @retval None
+  */
+static void Get_SerialNum(void)
+{
+  uint32_t deviceserial0, deviceserial1, deviceserial2;
+
+  deviceserial0 = *(uint32_t *) DEVICE_ID1;
+  deviceserial1 = *(uint32_t *) DEVICE_ID2;
+  deviceserial2 = *(uint32_t *) DEVICE_ID3;
+
+  deviceserial0 += deviceserial2;
+
+  if (deviceserial0 != 0)
+  {
+    IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8);
+    IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4);
+  }
+}
+
+/**
+  * @brief  Convert Hex 32Bits value into char 
+  * @param  value: value to convert
+  * @param  pbuf: pointer to the buffer 
+  * @param  len: buffer length
+  * @retval None
+  */
+static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len)
+{
+  uint8_t idx = 0;
+
+  for (idx = 0; idx < len; idx++)
+  {
+    if (((value >> 28)) < 0xA)
+    {
+      pbuf[2 * idx] = (value >> 28) + '0';
+    }
+    else
+    {
+      pbuf[2 * idx] = (value >> 28) + 'A' - 10;
+    }
+
+    value = value << 4;
+
+    pbuf[2 * idx + 1] = 0;
+  }
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

STM32/STM32CUBE/USB_VIRTUAL_PORT/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

STM32/bitacora.md

@@ -0,0 +1,14 @@
+# Bitacora de trabajo Microcontrolador STM32F103C8
+
+## Platformio + STM32CUBEMX
+
+Se instala la herramienta STM32CubeMX la cual ayudara con las configuraciones de los diferentes perifericos del microcontrolador. (funciona sobre linux tambien )
+
+### Stm32Cube
+
+- [x] Blink
+- [x] USB Virtual port
+- [ ] ADC
+
+### Referencias
+[https://opensimhardware.wordpress.com/pedal-button-controller/](https://opensimhardware.wordpress.com/pedal-button-controller/)